Can Not To Connect To My Dvr Camera Online

DVR Viewer Software Setup for Network / Remote Internet Camera View

This page has instructions on how to setup the remote security camera / DVR viewer software for JPEG2000 DVRs. CCTV Camera Pros use to supply the dual codec JPEG2000 DVR, however, those JPEGs DVRs has been replaced by the latest Viewtron CCTV / HD security photographic camera DVR which works with analog CCTV cameras, HD-over-Coax security cameras, 4K BNC security cameras, and network IP cameras. You tin still employ the JPEG2000 DVR viewer setup instructions hither.

Viewtron DVRs include the all-time remote photographic camera viewing apps for iPhone, Android, Mac, and Windows.

Remote Security Camera View from iPhone, Android, Mac & Windows Apps

The DVR software that was included with JPEG DVRs is chosen the integrated remote station (IRS). One of the applications in the IRS is a transmitter that allows y'all to sentry your security cameras over the Internet or Intranet (internal network / LAN). The transmitter is meant to replace the DVR viewer that was used in the last version of the JPEG DVR.

The integrated remote station as well lets yous review previously recorded surveillance video footage. The terminal version of the DVR viewer integrated remote station that was released can be downloaded here: Integrated Remote Station. The integrated remote station, likewise referred to as the DVR viewer software, runs on a Microsoft Windows based estimator.

DVR Viewer Setup

Please follow these setup instructions to setup remote Internet access for the dual codec JPEG DVR:

Assign an IP Accost to your Surveillance DVR

In this section, we will assign your surveillance DVR an IP address. Make sure that your DVR is connected to your network by attaching an ethernet cable to the dorsum of your DVR and attaching the other end to your router.

Login to your DVR by pressing the menu push button on the DVR or on the wireless remote control.
When y'all are prompt to enter a password, only printing the OK push on the DVR or remote. The default admin countersign for the DVR is blank. If you take already setup an admin countersign for your DVR, then enter this, so press OK.
From your DVRs System menu, select External Device.
On the External Device menu, select TCP/IP Setup.
On the TCP/IP Setup screen, select DHCP setup and press enter.
On the DHCP setup screen, confirm that the DHCP way is set to automated. If it is not, arrange information technology so that information technology is by pressing the OK button.
Select Detect IP and press enter. The screen should refresh and populate values below. Note the IP address. This is the internal IP accost that your router has assigned to your DVR. This is the IP address that you volition setup port forwarding for.
After you have noted this IP address, select DHCP Mode and press OK. The fashion volition be changed Transmission. This will ensure that your DVR will always be assigned the same IP address from your router. THIS IS IMPORTANT considering if you loose power to your router, your router may assign your DVR a deviation IP address and you lot will no longer exist able to access the DVR remotely.
Press the bill of fare button once to return to the TCP/IP setup screen.
On the TCP/IP setup screen, select IP config setup and press enter. On the IP config setup screen, confirm the port number of your DVR every bit seen below. The default port is 8000. If your DVR is non ready to port 8000, please edit this value to set to 8000. NOTE: please ignore that the beneath screen shot shows port 50000. Port 50000 was used for the last version of the JPEG DVR.
Press the Carte several times on your DVR or remote until you exit out of the DVR menu organization and run into the live view of your cameras.

Local Area Network (LAN) DVR Viewer Admission

The Integrated Remote Station allows you to access your security cameras locally on your netork also every bit remotely over the Internet. Before proceeding with remote Internet admission, information technology is a good idea to test out local access starting time. Also if yous do plan on using the DVR viewer / Integrated Remote Station from on the aforementioned network as your DVR, yous will get much better performance using your network's local IP address

Install the about recent version of the Integrated Remote Station by downloading it from our website here: Integrated Remote Station Download. This version is always the nigh recent and should exist used instead of the version that is on the CD that came with your DVR.
Relieve the file "JPEG-IRS-Setup.exe" to your windows desktop or select run. This is the installation file to install the Remote Station on your computer. If you saved the file, locate it and double click on it to brainstorm installation. If you selected to run the program, the installation will begin after the file is done downloading.
Once the installation is complete, an icon will exist created on your Windows desktop to launch the Integrated Remote Station. The icon will look like this:
Double-click on the icon to launch the plan.
On the primary IRS screen, click on the IRS Setup push button.
On the IRS Setup screen, click on the Registering Site button. This will open up a new Window where you tin can add the settings to connect to your DVR. This screen can be seen beneath.

A) Select Manul for CONNECTION.
B) Enter the IP address that yous previously noted from your DVR's TCP/IP setup screen in the Address field. IMPORTANT: If whatsoever of the number fields in the IP address contain leading zeros, they should exist removed. For example, if your DVR'due south IP accost is 192.168.000.066, you should enter 192.168.0.66.
C) Enter 8000 for PORT
D) Enter admin for USER ID
East) Leave the password blank if you did not setup a password on your DVR or enter your DVR password if you lot did set one upward.

Press OK when done.
You should now run into an entry created for the local area connection (Intranet) information that yous just entered in the Site Setup list on the IRS Setup screen. Click on the entry that you just created so that information technology is highlighted in green then press OK.
On the main Integrated Remote Station screen click on the Transmitter button. This volition open the DVR transmitter which is that new DVR viewer application. You can notation that also in this list there are other application. Although this application replaces the DVR Viewer, you tin can see there is still a Viewer application available. This is so that older legacy DVRs tin still utilize the IRS application past using the DVR Viewer. Think for the dual codec DVRs you should use the Transmitter because you volition become amend functioning equally information technology takes advantage of the H.264 MPEG-4 video encoding built into it.
One time the transmitter application opens, the connection information that you setup will be populated in the upper correct. Click on the Connect button. The transmitter should fairly quickly connect to your DVR and display your security cameras.
If you are unable to connect, please become back and to this section and assign an IP accost to your DVR.
If you lot are still unable to connect, continue to the next section to setup port forwarding on your router and complete information technology, and then try to connect once again.

Setup Port Forwarding on your Router

Port forwarding needs to be setup on your router so that a computer on the Internet can communicate remotely with your surveillance DVR. Click here if you want to larn more well-nigh how port forwarding works. Follow the below instructions to setup port forwarding.

Remember: Your DVR is going to use port 8000 (non 50000). 50000 was the default port for legacy not-dual codec DVRs).

If yous do non accept 1 of the routers listed below, delight consult the transmission for the router that yous have or call your Internet access provider (ISP) for assistance if you are using a modem / router supplied by them. Tell them that you need to open and forward port 8000 to a DVR on your network.

LinkSys Port Forwarding setup instructions
D-Link Port Forwarding setup instructions

Setup static DHCP IP Address

Although you previously setup the DVR to ever asking the same IP address from your router when when you lot set the DHCP setting to transmission in the DVR configuration, it is even so a good thought to also configure your router to always assigns the aforementioned IP address to your DVR. Some routers support this feature and some practise not. If your does not, information technology is OK to skip this section. The reason to set this up if you tin is that if your router needs to be restarted or if there is a power failure, at that place is risk that your DVR will exist assigned a new IP address. This will brand the port forwarding setup that you just finished useless. Follow these instructions to setup a static IP address for your DVR.

D-Link Static IP Adress Setup

Remote Cyberspace DVR Viewer Admission

These concluding three sections are needed to setup the remote Internet access to your security cameras. The start matter that should exist washed to setup remote access is to find out if your Net connection has a static or dynamic IP address. If yous do not know, delight contact your Internet provider and ask them. If you have a static IP address, you can skip the next 2 sections and jump to setting up the Internet connection to your surveillance DVR.

Creating and Configuring a Dynamic DNS Business relationship

If your DVR volition be connected to the Internet using a dynamic IP address (almost cable and DSL connections), you demand to setup a free service to manage the DNS (domain proper name service) for yous and then that you can access your DVR remotely without needing to keep track of your IP address. If y'all are unsure whether your Internet connection uses a static or dynamic IP address, delight contact your Internet service provider. If y'all are using a static IP address, you can skip this section and the next section "Setup Dynamic DNS on your Router". If you lot are using a dynamic IP address, click hither to setup your costless dynamic DNS service . Render to this screen to go along after setting upwardly your free dynamic DNS service.

Setup Dynamic DNS on your Router

Dynamic DNS is used when the Internet connection you will be using for your DVR uses a dynamic IP accost. The settings that you setup using the DynDNS service will be added to your router's DDNS configuration to ever go on your IP address upwards to date. The host proper noun that you chose, something similar "mydvr.dyndns.org", will e'er be kept up to engagement with the latest IP address assigned to your Internet connexion by your ISP. This mode yous can use your host name to connect to your DVR remotely instead of trying to go on track of your dynamic IP address. CCTV Camera Pros has DDNS setup instructions for D-Link and LinkSys routers. The instructions are based on certain models but are likely the same or close to the same for other models of D-Link and LinkSys routers. If you demand specific instructions for you lot router, please consult the manual that came with it and await under the section that has to do with Dynamic DNS support. Most modernistic router/switches support dynamic DNS.

LinkSys Router Setup - Dynamic DNS Service

Setup Internet Connexion to your DVR

The last step is to configure the Internet connection in the Integrated Remote Station for access from outside of your local network.

If the IRS is not already running, please start it past double-clicking on the JM-IRS icon on your desktop:
One the main IRS screen, click on the IRS Setup button.

Nosotros volition exist calculation a new entry for your remote Internet connection. So when you lot are finished, if you lot also setup the LAN connection, yous will have two connection configured in the IRS setup. Ane for local access to your DVR and one for remote Internet access.
On the IRS Setup screen, click on the Registering Site button. This will open a new Window where you can add the settings to connect to your DVR. This screen can exist seen below.

A) Select Manul for CONNECTION.
B) In the Accost field, enter the static IP accost that your Internet access provider gave you if you are using a static IP accost. If you are using a dynamic IP address and finished setting up your DynDNS account, delight enter the host name that you setup when registering.
C) Enter 8000 for PORT
D) Enter admin for USER ID
E) Exit the password bare if you did not setup a password on your DVR or enter your DVR password if you did prepare one up.

Press OK when washed.
You lot should now run into an entry created for the Internet connectedness information that you simply entered in the Site Setup list on the IRS Setup screen. Click on the Internet entry that you lot merely created so that it is highlighted in dark-green and so press OK.
On the chief Integrated Remote Station screen click on the Transmitter button. This volition open the DVR transmitter which is that new DVR viewer awarding. You can note that also in this list in that location are other application. Although this application replaces the DVR Viewer, you tin run across there is all the same a Viewer awarding available. This is so that older legacy DVRs can still use the IRS application by using the DVR Viewer. Remember for the dual codec DVRs you should use the Transmitter because you volition get amend performance as information technology takes advantage of the H.264 MPEG-4 video encoding built into it.
Once the transmitter awarding opens, the connection data that you lot setup volition exist populated in the upper correct. Click on the Connect push. The transmitter should fairly quicky connect to your DVR and display your security cameras.

DVR Viewer / Transmitter Troubleshooting Techniques

Ensure that your internal IP address to your DVR has not inverse purchase going through this section again to a ssign an IP accost to your DVR. If your IP address changed, so y'all need to setup port forwarding rules again based on that new IP accost, so get here to setup port forwarding on your router.
Make certain that you have the correct IP accost for your Cyberspace connectedness. Ask your ISP for your IP accost if using a static IP address. You lot can also look upwards the IP accost of your internet connectedness here:

Get My IP Address
Make sure that your router does not have any avant-garde firewall rules in place by consulting the transmission.
Call your Isp and enquire them if your modem has a firewall that you tin can disable.
Call your Internet access provider and brand sure that they do non cake any incoming ports to your Internet connexion.

Recommended Camera Viewing Apps and Software

Yous may be interested in in these mobile apps and desktop PC software that support remote security camera viewing.

How to Watch Security Cameras on iPhone
CCTV Viewer for Android
Mac Security Camera Software
CCTV Viewer - Remote Software for Windows

Related CCTV and Surveillance System Products

These are some of CCTV Photographic camera Pros best selling products.

Hard disk Multiplexer - this CCTV video multiplexer works with the following BNC security camera types: analog CCTV, AHD, Hard disk drive-TVI, HD-CVI.
iDVR-PRO Surveillance DVRs - these are by far our best selling CCTV DVRs. They are "hybrid DVRs" that work with analog CCTV, AHD, and Hard disk-TVI type cameras.
CCTV Cameras - many of our analog CCTV cameras as well back up multiple Hard disk security camera modes. Users tin can switch the photographic camera to 1 of the Hard disk video modes when they upgrade their DVR to high definition.
180 Caste Dome Camera
Turret Security Cameras

Source: https://www.cctvcamerapros.com/DVR-Viewer-Connection-s/227.htm

Posted by: boucherleopragues.blogspot.com